This Aluminum 6061 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance, making it a premier choice for robust pulling and lifting assemblies in industrial environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.807" |
| Length | 37" |
| Width | 39" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.807 inches thick, 37 inches in length, and 39 inches in width. Composed of a T6 temper, it exhibits an exceptional yield strength of 35,000 psi and an ultimate tensile strength of 38,000 psi, ensuring reliable performance under significant load. Its inherent corrosion resistance and weldability facilitate integration into complex structures. This material's balance of mechanical properties and light weight makes it indispensable for custom fabrication in aerospace, marine, and industrial equipment where weight optimization is critical without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the receiving structure is clean and free of debris. 2. Position the Aluminum 6061 stock sheet precisely according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques as dictated by the application's engineering requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for aluminum's strength profile. | Employ fasteners specifically designed for use with aluminum alloys, considering shear strength and galvanic corrosion potential. |
| Applying excessive heat during welding, leading to loss of temper in the heat-affected zone. | Utilize controlled welding procedures with appropriate filler metals (e.g., 4043 or 5356) and post-weld heat treatment if required to restore mechanical properties. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixtures and rigging components, Structural elements for material handling equipment, Lightweight, high-strength platforms for winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||