This 0.597-inch thick Aluminum 6061 stock sheet, measuring 36" x 37", is engineered for demanding hydraulic systems. It offers exceptional strength, corrosion resistance, and machinability for reliable component fabrication.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.597" |
| Length | 36" |
| Width | 37" |
A proven choice for industrial professionals, this Aluminum 6061 stock sheet exhibits a thickness of 0.597 inches, a length of 36 inches, and a width of 37 inches. Alloy 6061, a precipitation-hardened aluminum alloy, is renowned for its excellent corrosion resistance, good strength, weldability, and formability. These characteristics make it exceptionally well-suited for fabricating critical hydraulic components such as manifolds, fluid reservoirs, cylinder bodies, and structural supports where both performance and longevity are paramount. Its balanced properties ensure consistent behavior under pressure and varying environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and integrity before cutting. 2. Machine to precise component specifications using appropriate tooling for aluminum. 3. Perform necessary finishing operations such as deburring and cleaning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling without adjusting speeds and feeds for aluminum. | Employ high-speed steel or carbide tooling designed for aluminum machining, and adjust cutting speeds and feed rates to prevent excessive heat buildup and tool wear. |
| Improper cleaning leading to contamination in hydraulic systems. | Thoroughly clean all machined surfaces with a suitable degreaser and ensure all debris, including machining chips, are completely removed before assembly into hydraulic circuits. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Hydraulic Cylinder Components, Fluid Reservoir Fabrication, Structural Supports for Hydraulic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||