This robust Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio, making it ideal for demanding pulling and lifting applications. Its excellent corrosion resistance ensures longevity in diverse environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.428" |
| Length | 22" |
| Width | 37" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a thickness of 0.428 inches, a length of 22 inches, and a width of 37 inches. Aluminum 6061 is a precipitation-hardened alloy known for its moderate to high strength, excellent corrosion resistance, good weldability, and ease of fabrication. Its thermal conductivity and non-magnetic properties further enhance its suitability for structural components in pulling and lifting equipment, marine applications, and aerospace structures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surrounding structure can safely support the intended load. 2. Accurately cut the stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using certified fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stressing the material beyond its yield strength during installation or operation. | Always consult engineering load ratings and perform proper stress analysis for the specific application. |
| Improper welding procedures leading to reduced material integrity. | Utilize TIG welding with appropriate filler material (e.g., 4043 or 5356) and pre-heat/post-heat procedures as recommended for 6061. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components for hoists and cranes, Custom fabricated lifting brackets and fixtures, Marine equipment supports and platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||