This robust Aluminum 6061 stock sheet offers superior strength and corrosion resistance. Precisely fabricated to 0.909" thickness, 15" width, and 38" length, it is engineered for demanding pressure and temperature control systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.909" |
| Length | 15" |
| Width | 38" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.909 inches, a width of 38 inches, and a length of 15 inches. Composed of Aluminum alloy 6061, it offers a desirable combination of moderate to high strength, excellent corrosion resistance, good weldability, and excellent machinability. This material is commonly employed in structural components, marine applications, and critical infrastructure where reliable performance under varying thermal and pressure conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the Aluminum 6061 sheet accurately according to design specifications. 3. Securely fasten the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper fastener selection leading to galvanic corrosion. | Utilize compatible fasteners, such as stainless steel or anodized aluminum, to prevent dissimilar metal reactions. |
| Over-tightening fasteners, causing localized stress concentrations. | Apply fasteners to the recommended torque specifications to avoid material deformation and premature failure. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Thermal management systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||