This premium Aluminum 6061 stock sheet, precisely dimensioned at 0.878" x 23" x 33", is engineered for superior performance in demanding hydraulic systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.878" |
| Length | 23" |
| Width | 33" |
A high-performance industrial component, this Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and excellent corrosion resistance, crucial for hydraulic system integrity. Its specific dimensions of 0.878 inches thickness, 23 inches in length, and 33 inches in width make it ideal for fabricating custom hydraulic manifolds, structural supports for hydraulic equipment, and specialized fluid power components. The 6061 alloy's inherent machinability allows for intricate designs and precise fits, ensuring optimal flow dynamics and reduced leakage in high-pressure applications. Its thermal conductivity also aids in heat dissipation within hydraulic circuits, further enhancing operational reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Perform necessary cutting, machining, or forming operations according to design. 3. Integrate into the hydraulic system as per established engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sheet thickness for the intended pressure rating. | Always consult hydraulic system pressure requirements and select sheet thickness accordingly, ensuring adequate safety margins. |
| Improper edge preparation leading to stress concentrations. | Ensure all cut edges are deburred and smoothed to prevent stress risers, especially in critical load-bearing areas. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Fabrication, Hydraulic Equipment Structural Components, Custom Fluid Power System Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||