This premium Aluminum 6061 stock sheet, measuring 0.817" thick, 14" wide, and 27" long, is engineered for superior thermal conductivity and structural integrity in demanding heating and cooling systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.817" |
| Length | 14" |
| Width | 27" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and excellent corrosion resistance, making it a prime choice for heat exchangers, ductwork, and structural components within HVAC systems. The 6061 alloy provides a balanced combination of mechanical properties, including good weldability and formability, crucial for custom fabrications. Its substantial 0.817-inch thickness ensures robust performance under thermal stress and mechanical load, guaranteeing longevity and efficiency in critical heating and cooling applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any contaminants before fabrication. 2. Utilize appropriate cutting and forming tools designed for aluminum alloys. 3. Securely fasten or weld the sheet to existing system components, adhering to standard industry practices for heat transfer surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding filler material for 6061 aluminum. | Consult welding specifications for 6061 aluminum and use an appropriate filler alloy, typically 4043 or 5356. |
| Insufficient edge preparation for welded joints. | Properly bevel and clean all edges to be joined to ensure full weld penetration and joint strength. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Components, HVAC Ductwork Fabrication, Structural Supports for Cooling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||