This Aluminum 6061 stock sheet provides exceptional strength and corrosion resistance for critical hydraulic system components. Its precise dimensions and superior machinability ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.811" |
| Length | 27" |
| Width | 13" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet exhibits excellent strength-to-weight ratio and superior corrosion resistance, making it ideal for hydraulic manifolds, cylinder components, and structural elements. The alloy's inherent machinability allows for intricate designs and tight tolerances crucial in high-pressure hydraulic systems. Tensile strength typically ranges from 45-50 ksi, with a yield strength of 40-45 ksi. Its nominal composition includes 0.8-1.2% magnesium and 0.4-0.8% silicon. Dimensions: 0.811" thickness, 27" length, 13" width.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Position the Aluminum 6061 sheet according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fasteners and sealing methods suitable for hydraulic pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fasteners that can lead to leaks under pressure. | Utilize fasteners specifically rated for the operating pressure and compatible with Aluminum 6061 to prevent galvanic corrosion. |
| Failing to properly deburr edges after cutting, which can cause seal damage. | Ensure all cut edges are smoothly deburred to prevent premature wear or damage to seals and O-rings. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Cylinder End Caps and Pistons, Structural Components in Hydraulic Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||