This 0.810" thick Aluminum 6061 stock sheet offers exceptional strength and corrosion resistance for critical pulling and lifting applications in harsh industrial settings. Its precise dimensions ensure reliable performance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.810" |
| Length | 15" |
| Width | 25" |
Designed for demanding industrial environments, this 0.810 inch thick Aluminum 6061 stock sheet measures 15 inches in length and 25 inches in width. Aluminum 6061 is a precipitation-hardened alloy, offering excellent corrosion resistance, good weldability, and high strength, making it ideal for structural components in demanding pulling and lifting equipment. Its favorable strength-to-weight ratio minimizes overall system mass without compromising load-bearing capacity. This sheet is manufactured to exacting tolerances for consistent performance in dynamic load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the area is clean and free from debris. 2. Accurately measure and mark cut lines on the aluminum sheet. 3. Utilize appropriate cutting tools (e.g., band saw, abrasive cut-off wheel) with coolant for precise cuts and to prevent overheating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that generate excessive heat, leading to material degradation or warping. | Employ cutting tools designed for aluminum and use adequate coolant to maintain a stable cutting temperature. |
| Failing to deburr sharp edges after cutting, creating a safety hazard and potential for stress concentration. | Thoroughly deburr all cut edges using a file or deburring tool to ensure a smooth, safe finish. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom fabricated lifting frames, Structural components for winches and hoists, Support plates for pulley systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||