This robust Aluminum 6061 stock sheet is engineered for superior performance in demanding pulling and lifting scenarios. Its substantial dimensions offer ample material for robust fabrication and secure component integration.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.704" |
| Length | 33" |
| Width | 23" |
Purpose-built for heavy-duty applications, this Aluminum 6061 stock sheet boasts a thickness of 0.704 inches, a length of 33 inches, and a width of 23 inches. Manufactured from heat-treatable Aluminum 6061, it offers an excellent combination of strength, corrosion resistance, and weldability, making it ideal for structural components in cranes, hoists, winches, and custom rigging assemblies. Its precise dimensions ensure consistent material properties and reliable performance under significant tensile and shear loads, crucial for safe and efficient material handling operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free of debris. 2. Precisely mark and drill mounting holes according to design specifications, utilizing appropriate drill bit sizes for Aluminum 6061. 3. Securely fasten the sheet using high-strength fasteners, torqued to manufacturer recommendations to prevent slippage or deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use fasteners rated for the anticipated load capacity and compatible with aluminum alloys to prevent premature failure. |
| Inadequate surface preparation before mounting. | Thoroughly clean and degrease the mounting surface to ensure optimal contact and prevent galvanic corrosion. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom winch bed fabrication, Reinforced hoist mounting plates, Heavy-duty rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||