This premium Aluminum 6061 stock sheet, precision-cut to 0.505" thickness, 24" length, and 27" width, is engineered for superior performance in hydraulic systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.505" |
| Length | 24" |
| Width | 27" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet exhibits a thickness of 0.505 inches, a length of 24 inches, and a width of 27 inches. The 6061 alloy offers a robust combination of high strength, excellent corrosion resistance, good weldability, and formability, making it a preferred material for demanding hydraulic components. Its balanced mechanical properties ensure structural integrity under pressure, while its machinability facilitates precise component manufacturing. This specific dimensioning is optimized for common hydraulic manifold block and structural support fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against design specifications. 2. Prepare mating surfaces for welding or fastening according to industry best practices. 3. Execute fabrication and assembly steps with appropriate tooling and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting methods that introduce excessive heat and alter material properties. | Employ precision cutting tools such as waterjet or EDM, or utilize controlled plasma/laser cutting with appropriate cooling. |
| Improper post-fabrication cleaning leading to contaminants affecting hydraulic fluid purity. | Thoroughly degrease and clean all surfaces with approved solvents, followed by compressed air blow-off to remove debris. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Hydraulic System Housings, Structural Support Components in Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||