This 0.467" thick, 22" x 34" Aluminum 6061 stock sheet is engineered for demanding pulling and lifting applications. Its superior strength-to-weight ratio ensures robust performance without compromising mobility.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.467" |
| Length | 22" |
| Width | 34" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet (0.467" thickness, 22" length, 34" width) offers exceptional structural integrity. The 6061 alloy provides a balanced combination of strength, corrosion resistance, and weldability, making it suitable for environments subjected to dynamic loads. Its yield strength of approximately 35 ksi and tensile strength of around 38 ksi ensure reliable performance in pulling and lifting assemblies. This material is commonly specified for structural components, custom fixtures, and fabrication projects where weight savings are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any contaminants. 2. Position the Aluminum 6061 sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting, riveting) as dictated by the application's load requirements and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the load capacity of Aluminum 6061. | Always select fasteners (bolts, rivets) with a shear and tensile strength that exceeds the anticipated loads on the assembly. |
| Inadequate preparation of weld joints for Aluminum 6061. | Ensure proper joint design and cleaning of the aluminum surface (removing oxide layer) prior to welding to achieve optimal weld penetration and strength. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixtures, Structural components for material handling equipment, Fabricated pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||