This premium Aluminum 6061 stock sheet provides exceptional strength-to-weight ratio, making it ideal for robust pulling and lifting solutions. Its dimensional stability and corrosion resistance ensure long-term performance in critical environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.457" |
| Length | 31" |
| Width | 14" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.457 inches, a length of 31 inches, and a width of 14 inches. Composed primarily of aluminum, silicon (0.4-0.8%), and magnesium (0.8-1.2%), it exhibits excellent tensile strength, yield strength, and fatigue resistance, crucial for dynamic load-bearing scenarios. Its machinability and weldability are superior, facilitating integration into complex assemblies. The alloy's inherent corrosion resistance further enhances its suitability for marine and industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensional accuracy against design requirements. 2. Ensure mounting surfaces are clean, flat, and free of contaminants. 3. Secure sheet using appropriate fastening methods, considering load distribution and stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the intended load. | Employ high-strength, corrosion-resistant fasteners (e.g., stainless steel) with appropriate load ratings and thread engagement. |
| Inadequate surface preparation leading to poor adhesion or stress points. | Thoroughly clean and deburr all edges and surfaces that will be in contact with other components or fasteners. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixtures, Structural components for hoists, Reinforced crane attachments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||