This premium Aluminum 6061 stock sheet is engineered for demanding pressure and temperature control systems. Its precise dimensions and superior material properties ensure reliable performance in critical industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.455" |
| Length | 30" |
| Width | 27" |
A high-performance industrial component, this 0.455-inch thick Aluminum 6061 stock sheet, measuring 30 inches in length and 27 inches in width, is manufactured to exacting standards. Aluminum 6061 offers an exceptional balance of strength, corrosion resistance, and weldability, making it a preferred material for applications subject to thermal cycling and moderate pressure. Its excellent thermal conductivity further enhances its utility in heat exchange and dissipation scenarios within pressure and temperature control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from debris. 2. Accurately cut the Aluminum 6061 sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using approved mechanical fasteners or welding techniques suitable for Aluminum 6061, adhering to industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can cause galvanic corrosion. | Utilize fasteners made from materials that are galvanically compatible with Aluminum 6061, such as stainless steel grades 304 or 316. |
| Applying excessive heat during welding, leading to material degradation. | Employ controlled welding procedures with appropriate filler materials and pre/post-heating to maintain the structural integrity of the Aluminum 6061. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Components, Pressure Vessel Linings, Temperature Control Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||