This robust Aluminum 6061 stock sheet offers superior strength and corrosion resistance, making it an ideal component for demanding pulling and lifting applications where reliability is paramount.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.401" |
| Length | 17" |
| Width | 25" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a precise thickness of 0.401 inches, a length of 17 inches, and a width of 25 inches. 6061 aluminum alloy is renowned for its excellent strength-to-weight ratio, good corrosion resistance, and weldability, making it suitable for structural components in various industrial environments. Its heat-treatable nature allows for further customization of mechanical properties to meet specific performance requirements in moderate to high-stress pulling and lifting assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean and free of debris. 2. Align the Aluminum 6061 stock sheet with pre-drilled holes or designated mounting points. 3. Securely fasten the sheet using appropriate hardware, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the load requirements. | Always select fasteners rated for the maximum anticipated load and compatible with aluminum 6061 to prevent premature failure. |
| Improperly deburring edges after cutting, creating sharp hazards. | Thoroughly deburr all cut edges to ensure a smooth, safe finish, especially in areas of frequent contact or handling. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom fabrication for lifting rigs, Reinforcement plates in winch systems, Structural components for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||