This 0.381" thick Aluminum 6061 stock sheet is a high-performance material specifically chosen for demanding hydraulic applications requiring strength and corrosion resistance.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.381" |
| Length | 34" |
| Width | 24" |
Engineered for reliability and performance, this 0.381" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, crucial for hydraulic system integrity. With dimensions of 34" in length and 24" in width, its composition (typically 0.8-1.2% Mg, 0.4-0.8% Si, 0.15-0.40% Cu, and 0.04-0.35% Cr) ensures excellent machinability and weldability, making it ideal for fabricating hydraulic manifolds, fluid reservoirs, and structural components where weight reduction is paramount without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of contaminants. 2. Precisely cut the Aluminum 6061 sheet to the required dimensions for your hydraulic component. 3. Perform any necessary machining, welding, or assembly according to design specifications, adhering to best practices for aluminum alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners or welding consumables that can cause galvanic corrosion. | Always use fasteners and welding materials specifically designed for use with Aluminum 6061 to maintain material integrity and prevent corrosion. |
| Excessive heat input during welding, leading to reduced mechanical properties in the heat-affected zone. | Employ controlled welding techniques with appropriate heat management to preserve the strength and performance of the Aluminum 6061. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Fabrication, Fluid Reservoir Construction, Structural Components in Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||