This robust Aluminum 6061 stock sheet offers superior strength-to-weight ratio, making it an excellent choice for custom fabrication in pulling and lifting applications. Its precise dimensions ensure reliable performance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.340" |
| Length | 17" |
| Width | 17" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet provides exceptional performance for demanding pulling and lifting applications. With a thickness of 0.340", a length of 17", and a width of 17", it offers a substantial surface area for custom fabrication. Aluminum 6061 is renowned for its excellent corrosion resistance, good weldability, and high strength, making it suitable for environments where durability and lightweight properties are critical. Its machinability allows for intricate designs and precise component integration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify all dimensions and material certifications against project requirements. 2. Clean surfaces thoroughly to remove any contaminants. 3. Fabricate and integrate into the pulling or lifting system using appropriate joining methods (welding, fastening).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that may corrode with Aluminum 6061. | Employ stainless steel or appropriately coated fasteners to prevent galvanic corrosion. |
| Overheating the material during welding, leading to reduced strength. | Utilize proper welding techniques and heat management to maintain the material's integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixtures, Reinforcement plates for pulling mechanisms, Structural components in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||