This premium Aluminum 6061 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance, making it the ideal choice for demanding pulling and lifting applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.328" |
| Length | 24" |
| Width | 31" |
Manufactured under strict quality controls, this 0.328-inch thick Aluminum 6061 stock sheet is precisely dimensioned at 24 inches in length and 31 inches in width. Aluminum 6061 is a precipitation-hardened alloy renowned for its excellent strength, moderate to high fatigue strength, good corrosion resistance, and excellent weldability. Its versatility allows for use in a wide array of structural components within pulling and lifting equipment, including custom fabricated frames, brackets, and supports where weight reduction is critical without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free from debris. 2. Position the Aluminum 6061 stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate mechanical fasteners or welding techniques as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can cause galvanic corrosion with aluminum. | Utilize stainless steel or other compatible corrosion-resistant fasteners. |
| Excessive heat input during welding, leading to loss of temper and reduced strength. | Employ proper welding procedures and pre/post-weld heat treatments for Aluminum 6061. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting frame fabrication, Jig and fixture construction for material handling, Specialized winch and hoist components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||