This premium Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio, making it a superior choice for demanding pulling and lifting applications where performance and durability are paramount.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.320" |
| Length | 44" |
| Width | 25" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet boasts a precise 0.320" thickness, 44" length, and 25" width. Fabricated from Alloy 6061, it exhibits excellent corrosion resistance, good weldability, and high tensile strength, making it ideal for structural components in aerospace, marine, and industrial lifting equipment. Its machinability ensures ease of fabrication for custom designs and critical load-bearing assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility and dimensional requirements for the intended application. 2. Ensure proper support and handling during installation to prevent deformation or damage. 3. Secure the sheet using appropriate fastening methods, considering load distribution and stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong alloy for corrosive environments. | Select Aluminum 6061 for its inherent corrosion resistance in marine and industrial settings. |
| Exceeding the material's load-bearing capacity. | Consult engineering drawings and perform stress analysis to ensure the sheet meets or exceeds required strength specifications. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components for hoists and cranes, Support beams for winches, Custom lifting frames and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||