This Aluminum 6061 stock sheet offers exceptional strength and corrosion resistance, making it a premier choice for critical hydraulic system components. Its precise dimensions ensure reliable performance and easy integration.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.313" |
| Length | 37" |
| Width | 31" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.313 inches, a length of 37 inches, and a width of 31 inches. Aluminum alloy 6061 is a precipitation-hardened aluminum-magnesium-silicon alloy known for its moderate to high strength, excellent corrosion resistance, good weldability, and good machinability. These attributes make it particularly well-suited for hydraulic manifolds, pump housings, valve bodies, and structural components within hydraulic systems where durability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Accurately cut to the required dimensions using appropriate machining tools. 3. Deburr all edges to prevent stress concentrations and material fatigue.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for aluminum, leading to poor edge quality and potential material damage. | Utilize high-speed steel or carbide-tipped cutting tools specifically recommended for aluminum alloy machining. |
| Ignoring the directional grain of the aluminum during fabrication, which can lead to anisotropic properties and premature failure. | Be mindful of the material's grain structure and orient cuts and stress points accordingly. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifolds, Pump Housings, Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||