This premium Aluminum 6061 stock sheet, measuring 0.249" thick, 47" long, and 23" wide, is engineered for demanding pressure and temperature control systems. Its robust composition ensures reliable performance.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.249" |
| Length | 47" |
| Width | 23" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet provides exceptional performance in moderate to high-stress environments. The 0.249" thickness offers a substantial material reserve for fabrication, while the 47" x 23" dimensions allow for efficient component creation. Aluminum 6061 is renowned for its excellent corrosion resistance, good formability, and high strength-to-weight ratio, making it ideal for heat exchangers, pressure vessels, and control manifold bodies where thermal conductivity and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Ensure proper cutting and machining techniques are employed to maintain material integrity. 3. Apply appropriate joining methods (e.g., welding, brazing) suitable for Aluminum 6061, adhering to industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding filler material for Aluminum 6061. | Consult welding charts and use a recommended filler alloy, typically 4043 or 5356, for optimal joint strength and corrosion resistance. |
| Inadequate surface preparation before fabrication. | Thoroughly clean the sheet surface to remove any oils, contaminants, or oxide layers that could compromise weld quality or adhesion. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, Pressure Vessel Components, Control Manifold Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||