This 0.238-inch thick Aluminum 6061 stock sheet, measuring 25" x 41", is a robust material ideal for fabricating components in pulling and lifting systems. Its superior strength-to-weight ratio ensures efficient operation.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.238" |
| Length | 25" |
| Width | 41" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.238 inches, a width of 41 inches, and a length of 25 inches. Aluminum 6061 is a precipitation-hardened alloy renowned for its excellent corrosion resistance, good weldability, and moderate to high strength. Its balanced properties make it a primary choice for structural applications, including those in the pulling and lifting sector where both durability and weight are critical considerations. This sheet provides a solid foundation for custom fabrication of sheaves, brackets, frame components, and other load-bearing elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly before assembly. 2. Position sheet according to design specifications. 3. Secure using appropriate fasteners and welding techniques as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper welding techniques for 6061 aluminum. | Employ TIG or MIG welding with appropriate filler metals (e.g., 4043 or 5356) and preheating if necessary to prevent cracking. |
| Exceeding the material's yield strength in load calculations. | Always perform detailed stress analysis based on the specific application and ensure designed loads are well within the material's specified yield and tensile strengths. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom sheave fabrication, Winch drum components, Crane arm extensions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||