This Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio for demanding pulling and lifting applications. Precisely manufactured for reliability and performance in industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.228" |
| Length | 45" |
| Width | 44" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet (0.228" thickness, 45" length, 44" width) provides superior corrosion resistance and good weldability. Its T6 temper ensures excellent mechanical properties, including high tensile and yield strength, making it suitable for structural components, marine fittings, and aerospace applications where lightweight yet robust materials are critical. The alloy's machinability allows for complex part fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean, dry, and free from contaminants. 2. Align the sheet accurately according to design specifications and mark all necessary attachment points. 3. Secure the sheet using appropriate fasteners, ensuring uniform tension and load distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing localized stress and potential deformation. | Use a calibrated torque wrench to tighten fasteners to the recommended specifications for the chosen hardware and material. |
| Improper edge preparation leading to stress risers or premature failure. | Deburr and chamfer all cut edges to a smooth finish, removing any sharp points or imperfections. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom structural fabrication for lifting equipment, Reinforcement plates in marine and aerospace assemblies, Lightweight chassis components for material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||