Engineered for robust pulling and lifting tasks, this Aluminum 6061 stock sheet provides exceptional strength-to-weight ratio. Its corrosion resistance and ease of fabrication make it a reliable choice for critical industrial components.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.174" |
| Length | 18" |
| Width | 22" |
Designed for demanding industrial environments, this Aluminum 6061 stock sheet boasts a thickness of 0.174 inches, a length of 18 inches, and a width of 22 inches. Fabricated from the widely used 6061 aluminum alloy, it offers excellent corrosion resistance, good weldability, and a superior strength-to-weight ratio, making it suitable for a variety of structural and fabricated components in pulling and lifting equipment. Its mechanical properties ensure reliable performance under moderate stress conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean and free of debris. 2. Precisely align the stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate fasteners and welding techniques, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fastener types for aluminum, leading to galvanic corrosion. | Employ stainless steel or cadmium-plated fasteners specifically designed for aluminum applications. |
| Overheating the aluminum during welding, causing loss of strength in the heat-affected zone. | Utilize appropriate welding parameters and pre-heating techniques for 6061-T6 alloy to minimize heat input and maintain mechanical properties. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom fabricated lifting fixtures, Reinforcement plates for pulling mechanisms, Structural components in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||