This premium Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio, making it ideal for demanding pulling and lifting applications. Its corrosion resistance ensures longevity in diverse environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.108" |
| Length | 26" |
| Width | 34" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.108 inches, a length of 26 inches, and a width of 34 inches. Aluminum 6061 is a precipitation-hardened alloy renowned for its excellent strength, good corrosion resistance, weldability, and formability. These properties make it a superior choice for fabricating components requiring robust structural integrity without excessive weight, common in specialized pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean, dry, and free of debris. 2. Position the Aluminum 6061 stock sheet according to the design specifications. 3. Securely fasten the sheet using appropriate hardware (e.g., rivets, bolts) suitable for aluminum and the load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for aluminum applications. | Employ fasteners specifically designed for aluminum or compatible with aluminum alloys to prevent galvanic corrosion and ensure secure fastening. |
| Over-stressing the material beyond its tensile strength limits during fabrication or use. | Perform load calculations based on the material's yield and ultimate tensile strength (refer to Alloy 6061 data sheets) to avoid structural failure. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixture fabrication, Componentry for winch systems, Reinforcement plates in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||