This 0.093" thick Aluminum 6061 stock sheet, measuring 46" x 20", is engineered for demanding hydraulic systems. Its superior strength-to-weight ratio and excellent corrosion resistance make it a premier choice for critical components.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.093" |
| Length | 46" |
| Width | 20" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet offers a robust solution for hydraulic applications. With precise dimensions of 0.093" thickness, 46" length, and 20" width, it delivers consistent performance. 6061-T6 alloy provides exceptional tensile strength, yield strength, and fatigue resistance, crucial for pressure containment and dynamic loads. Its inherent corrosion resistance ensures longevity in diverse environmental conditions. This material is readily machinable, allowing for intricate component fabrication and tight tolerances essential for efficient hydraulic fluid management.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants before fabrication. 2. Fabricate components according to design specifications, maintaining tight tolerances. 3. Integrate fabricated parts into the hydraulic system, verifying all connections.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys for high-pressure hydraulic applications. | Always specify Aluminum 6061-T6 or equivalent for its superior strength and fatigue resistance required in hydraulic systems. |
| Improper surface preparation leading to contamination. | Thoroughly clean all surfaces before and during fabrication to prevent debris from entering hydraulic circuits. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifolds, Cylinder Components, Hydraulic Reservoir Fabrication, Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||