This Aluminum 6061 stock sheet offers excellent strength-to-weight ratio and corrosion resistance, making it a preferred choice for critical pressure and temperature control components and housings.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.036" |
| Length | 24" |
| Width | 42" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet, with dimensions of 0.036" thickness, 24" length, and 42" width, is a T6 temper alloy. It exhibits a nominal tensile strength of 45,000 psi and yield strength of 40,000 psi, offering superior structural integrity. Its excellent weldability and machinability, coupled with good corrosion resistance, make it suitable for demanding environments in aerospace, marine, and industrial pressure vessels, heat exchangers, and thermal management systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately cut to the required dimensions using appropriate tooling. 3. Fabricate or assemble the component following design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and dimensional inaccuracies. | Employ sharp, high-quality cutting tools specifically designed for aluminum to achieve clean edges and precise dimensions. |
| Improper welding or joining techniques, compromising structural integrity. | Follow established welding procedures for 6061 aluminum, ensuring proper joint preparation and filler material selection. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Thermal management systems, Custom control panel housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||