This Aluminum 6061 stock sheet, precision-cut to 0.133" x 21" x 25", offers superior strength-to-weight ratio and excellent corrosion resistance, making it ideal for critical hydraulic system components.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.133" |
| Length | 21" |
| Width | 25" |
Designed for demanding industrial environments, this Aluminum 6061 stock sheet is a superior choice for hydraulic applications due to its excellent corrosion resistance, high strength, and good formability. The 6061 alloy exhibits a tensile strength of approximately 45,000 psi and a yield strength around 40,000 psi, ensuring structural integrity under pressure. Its inherent resistance to galvanic and uniform corrosion makes it suitable for wet or exposed hydraulic environments. The precise dimensions of 0.133 inches thickness, 21 inches length, and 25 inches width allow for efficient fabrication of manifolds, structural supports, and protective housings within hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Carefully position the Aluminum 6061 sheet for fabrication or assembly. 3. Securely fasten or weld the sheet according to hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners leading to galvanic corrosion. | Utilize stainless steel or aluminum fasteners specifically rated for use with 6061 aluminum in corrosive environments. |
| Overheating the material during welding, causing loss of temper and reduced strength. | Employ controlled welding techniques and post-weld heat treatment if required by the application's critical stress demands. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Structural Components for Hydraulic Assemblies, Protective Housings and Enclosures for Hydraulic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||