This premium Aluminum 6061 stock sheet offers exceptional thermal conductivity and strength, crucial for efficient heating and cooling systems. Its robust 0.397-inch thickness ensures durability and performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.397" |
| Length | 13" |
| Width | 12" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.397 inches (10.08 mm), a length of 13 inches (330.2 mm), and a width of 12 inches (304.8 mm). As a widely recognized alloy, 6061 exhibits excellent corrosion resistance, good weldability, and superior strength-to-weight ratio, making it a preferred material for heat exchangers, HVAC components, and thermal management solutions where efficient heat transfer and structural integrity are paramount. Its precipitation-hardenable nature allows for optimized mechanical properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Fabricate to precise dimensions according to design schematics. 3. Mechanically fasten or weld securely to the existing system structure, maintaining proper thermal contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor thermal contact. | Thoroughly clean and degrease all mating surfaces before installation to maximize heat transfer efficiency. |
| Overheating during welding, compromising material properties. | Utilize appropriate welding techniques and pre/post-weld heat treatments for Aluminum 6061 to maintain its metallurgical integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, HVAC Component Manufacturing, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||