This 0.754" thick Aluminum 6061 stock sheet, measuring 44" x 23", is engineered for high-performance hydraulic systems. Its superior strength-to-weight ratio and corrosion resistance ensure reliability in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.754" |
| Length | 44" |
| Width | 23" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet offers exceptional dimensional accuracy. With a thickness of 0.754 inches, a length of 44 inches, and a width of 23 inches, it meets stringent material specifications for the hydraulics industry. Aluminum 6061 is renowned for its excellent corrosion resistance, good strength, weldability, and machinability, making it a preferred choice for hydraulic manifolds, valve bodies, and structural components where weight reduction and durability are critical. This alloy's balanced properties ensure consistent performance under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the Aluminum 6061 sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using compatible fasteners and sealing methods to prevent leaks in the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys not rated for hydraulic pressures. | Always specify and use Aluminum 6061 or equivalent alloys certified for hydraulic applications to ensure system integrity and safety. |
| Inadequate surface preparation before installation. | Thoroughly clean and deburr all edges and surfaces to prevent stress risers and ensure a proper seal, especially in high-pressure hydraulic circuits. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifolds, Valve Bodies, Hydraulic System Components, Structural Supports in Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||