This Aluminum 6061 stock sheet is engineered for superior performance in demanding hydraulic applications. Its robust alloy composition and precise dimensions ensure reliability and longevity in critical systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.758" |
| Length | 33" |
| Width | 38" |
Purpose-built for heavy-duty applications, this Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and excellent corrosion resistance, making it ideal for hydraulic manifold blocks, structural components, and fluid containment. With a precise thickness of 0.758 inches, a length of 33 inches, and a width of 38 inches, it meets stringent industry standards for hydraulic fluid compatibility and pressure endurance. The inherent properties of 6061 aluminum, including its machinability and weldability, facilitate complex fabrication processes required in specialized hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended hydraulic fluid and operating pressures. 2. Precisely machine to final component dimensions, adhering to tight tolerances. 3. Ensure all surfaces are free from contaminants and burrs prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys in high-pressure hydraulic systems. | Always select alloys specifically rated for hydraulic applications, such as Aluminum 6061, to ensure structural integrity and prevent catastrophic failure. |
| Inadequate surface preparation leading to leaks. | Thoroughly clean and deburr all machined surfaces, paying close attention to sealing areas, before assembly to guarantee leak-free operation. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Piston Pump Components, Hydraulic Cylinder Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||