This premium Aluminum 6061 stock sheet is engineered for demanding pressure and temperature control systems. Its robust composition ensures reliable performance and longevity in critical industrial environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.268" |
| Length | 25" |
| Width | 39" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and excellent corrosion resistance, crucial for pressure and temperature control components. With a thickness of 0.268 inches, a length of 25 inches, and a width of 39 inches, it is ideally suited for fabrication of heat exchangers, pressure vessels, and thermal management systems. The material's inherent thermal conductivity and formability facilitate efficient heat transfer and precise component shaping, meeting stringent industry standards for reliability and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces thoroughly to remove any contaminants. 2. Ensure mating surfaces are properly aligned and secured according to design specifications. 3. Perform leak testing and functional checks before bringing the system online.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor sealing. | Always degrease and deburr all edges and surfaces before assembly or welding. |
| Over-tightening fasteners, causing stress concentrations. | Use a torque wrench to adhere to specified torque values for all bolted connections. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, Pressure Vessel Components, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||