High-strength Aluminum 6061 alloy stock sheet, precisely manufactured for demanding pressure and temperature control systems. Its excellent thermal conductivity and corrosion resistance ensure reliable performance in critical environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.117" |
| Length | 31" |
| Width | 24" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet features a nominal thickness of 0.117 inches, a length of 31 inches, and a width of 24 inches. Composed of Aluminum alloy 6061, it exhibits a desirable combination of moderate to high strength (tensile strength typically 45-50 ksi), excellent corrosion resistance, good weldability, and superior machinability. Its inherent thermal conductivity makes it suitable for heat dissipation applications within pressure and temperature regulation systems, contributing to efficient operational stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions for the application. 3. Securely fasten the sheet using appropriate fasteners or welding techniques, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are not rated for the operating temperature or pressure. | Always specify fasteners (bolts, rivets, etc.) that are compatible with the operating conditions and the Aluminum 6061 alloy to prevent failure. |
| Improperly preparing the surface for welding, leading to weak or porous joints. | Thoroughly degrease and remove any oxides or surface treatments from the Aluminum 6061 before welding to ensure a strong, reliable bond. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat exchangers and thermal management components, Pressure vessel construction and internal components, Fluid control manifold fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||