High-grade Aluminum 6061 stock sheet, precisely manufactured to 0.782" thickness, 47" length, and 32" width. Engineered for superior performance and longevity in critical heating and cooling system fabrication.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.782" |
| Length | 47" |
| Width | 32" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio, excellent corrosion resistance, and good weldability, making it a preferred material for demanding HVAC applications. Its mechanical properties are optimized for heat exchangers, ducting, and structural components within heating and cooling systems. The precise dimensions of 0.782" thickness, 47" length, and 32" width ensure consistent fitment and performance in complex assemblies, meeting rigorous industry standards for thermal transfer and structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Prepare edges for fabrication (cutting, bending, welding) using appropriate tooling. 3. Integrate sheet into the heating or cooling system assembly, ensuring proper thermal contact and structural support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect alloy for corrosive environments within HVAC systems. | Always confirm the chosen aluminum alloy's resistance to specific chemical agents present in the heating or cooling medium. |
| Inadequate surface preparation before welding, leading to poor joint integrity. | Thoroughly clean the weld area, removing all oxides and contaminants to ensure a strong, defect-free weld. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, HVAC Ducting Systems, Chassis and Structural Components for Cooling Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||