This Aluminum 6061 stock sheet is a superior choice for demanding pressure and temperature control systems. Its precise dimensions and robust material properties ensure reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.156" |
| Length | 44" |
| Width | 44" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet delivers exceptional performance. Measuring 0.156 inches thick, 44 inches in length, and 44 inches in width, it's fabricated from Alloy 6061, a precipitation-hardened aluminum alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and superior weldability. This combination of properties makes it ideal for fabricating components used in pressure vessels, heat exchangers, and thermal management systems where precise dimensional stability and reliable thermal conductivity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and sealing methods, adhering to torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to seal failure. | Thoroughly clean and degrease all mating surfaces before installation. |
| Over-tightening fasteners, causing material deformation or stress points. | Use a calibrated torque wrench and adhere to recommended torque values for the fastener and material. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure Vessel Fabrication, Heat Exchanger Components, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||