This robust Aluminum 6061 stock sheet provides exceptional strength and corrosion resistance, making it ideal for critical hydraulic system components. Its precise dimensions ensure seamless integration and reliable fluid handling.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.655" |
| Length | 21" |
| Width | 26" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a thickness of 0.655 inches, a length of 21 inches, and a width of 26 inches. 6061-T6 aluminum alloy is renowned for its excellent strength-to-weight ratio, good corrosion resistance, and weldability, making it a preferred material for hydraulic manifold blocks, pump housings, and structural components. Its machinability allows for intricate designs and tight tolerances essential for high-pressure fluid control systems. This material's inherent properties ensure longevity and consistent performance in demanding hydraulic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against design specifications. 2. Prepare mounting surfaces for precise alignment and stress distribution. 3. Securely fasten the component using appropriate hardware, adhering to torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to stress concentration or leakage. | Thoroughly clean and deburr all mating surfaces to ensure a smooth, even contact area. |
| Over-tightening fasteners, causing deformation or cracking of the aluminum sheet. | Utilize a calibrated torque wrench and follow recommended torque values for the specific fasteners and application. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Pump and Valve Housings, Fluid Power System Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||