This 0.123" thick Aluminum 6061 stock sheet, measuring 30"x37", is engineered for demanding pressure and temperature control systems, offering superior corrosion resistance and machinability.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.123" |
| Length | 30" |
| Width | 37" |
A high-performance industrial component, this 0.123" thick Aluminum 6061 sheet offers a critical balance of strength, corrosion resistance, and weldability essential for pressure and temperature control applications. With dimensions of 30" in length and 37" in width, it provides ample material for fabrication of housings, heat exchangers, and manifold components operating under moderate stress and varying thermal conditions. Aluminum 6061's excellent thermal conductivity further enhances its suitability for heat transfer applications within these systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the component surface is clean and free from contaminants. 2. Precisely cut the Aluminum 6061 sheet to the required dimensions using appropriate fabrication tools. 3. Securely fasten the fabricated component within the pressure or temperature control system using compatible fasteners and sealing methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and compromised edge integrity. | Utilize sharp, dedicated metal-cutting blades (e.g., carbide-tipped) and ensure proper feed rates to achieve clean cuts. |
| Inadequate surface preparation before assembly, resulting in leaks or poor thermal contact. | Thoroughly degrease and clean all mating surfaces to ensure optimal sealing and heat transfer. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Temperature regulation housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||