This 0.877" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely cut to 20" x 36", it's engineered for demanding industrial applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.877" |
| Length | 20" |
| Width | 36" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.877 inches, a length of 20 inches, and a width of 36 inches. 6061 aluminum alloy is a precipitation-hardened aluminum alloy containing magnesium and silicon as its main alloying elements. It is known for its excellent corrosion resistance, good strength, toughness, and excellent weldability. This specific gauge is ideal for structural components, chassis fabrication, and applications requiring significant load-bearing capacity where weight optimization is critical. Its heat-treatable nature allows for enhanced mechanical properties through subsequent processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity prior to fabrication. 2. Employ appropriate cutting and machining techniques for aluminum alloys. 3. Ensure proper surface preparation for welding or joining operations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Utilize specialized carbide-tipped tooling designed for aluminum to prevent excessive heat buildup and ensure clean cuts. |
| Inadequate attention to grain direction during forming operations. | Always consider the grain direction of the aluminum sheet to prevent cracking or distortion during bending or stamping. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and body panels, Marine hardware and structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||