This 0.277" thick Aluminum 6061 stock sheet, measuring 30" x 38", offers superior thermal conductivity and corrosion resistance, making it ideal for efficient heat transfer in demanding HVAC systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.277" |
| Length | 30" |
| Width | 38" |
Precision-manufactured to tight tolerances, this Aluminum 6061 sheet features a nominal thickness of 0.277 inches, a width of 30 inches, and a length of 38 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and high thermal conductivity, making it a premier material for heat exchangers, ductwork, and other components within heating and cooling systems where efficient thermal management is critical. Its weldability and formability further enhance its utility in custom fabrications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Fabricate the sheet to the required dimensions according to design specifications. 3. Securely install the fabricated components using appropriate fastening methods, considering thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper material selection for the application's thermal load. | Verify the thermal conductivity requirements of the HVAC system and confirm that Aluminum 6061 meets or exceeds these specifications. |
| Neglecting to account for thermal expansion during installation. | Incorporate expansion joints or flexible connections to accommodate temperature fluctuations and prevent stress on the system. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchangers, HVAC Ductwork Fabrication, Chassis for Cooling Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||