This 0.405" thick Aluminum 6061 stock sheet is engineered for superior performance in pulling and lifting applications. Its robust construction and corrosion resistance ensure reliability in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.405" |
| Length | 19" |
| Width | 20" |
Precision-manufactured to tight tolerances, this 0.405" thick Aluminum 6061 sheet offers exceptional strength-to-weight ratio, critical for efficient pulling and lifting operations. Material grade 6061-T6 exhibits excellent corrosion resistance, weldability, and formability, making it suitable for custom fabrication of rigging components, custom frames, and structural elements in material handling systems. Dimensions of 19" in length and 20" in width provide substantial surface area for diverse project needs. Compliance with relevant industry standards ensures consistent quality and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and condition prior to fabrication. 2. Ensure all cutting, bending, and welding processes adhere to best practices for Aluminum 6061. 3. Integrate into the lifting or pulling system with appropriate fasteners and load-bearing considerations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper weld procedures leading to reduced strength in Aluminum 6061. | Utilize appropriate filler material (e.g., 4043 or 5356) and pre/post-weld heat treatment protocols specific to 6061-T6 to maintain structural integrity. |
| Exceeding the material's rated load capacity due to inadequate engineering analysis. | Conduct thorough stress analysis and consult engineering load charts to ensure the fabricated component's capacity meets or exceeds the required pulling or lifting force, factoring in safety margins. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom rigging components, Lightweight lifting frames, Material handling equipment fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||