This Aluminum 6061 stock sheet is a prime material for demanding pressure and temperature control applications. Engineered for optimal performance, its robust composition ensures reliability in critical systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.151" |
| Length | 19" |
| Width | 48" |
Specified by design engineers worldwide, Aluminum 6061 is a precipitation-hardened alloy offering an excellent combination of strength, corrosion resistance, and weldability. With a thickness of 0.151 inches, a length of 19 inches, and a width of 48 inches, this stock sheet is ideal for fabricating components used in heat exchangers, pressure vessels, and thermal management systems. Its excellent machinability allows for precise component creation in environments subject to moderate thermal cycling and pressure fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of contaminants. 2. Precisely cut the Aluminum 6061 sheet to the required dimensions using appropriate tooling. 3. Deburr all cut edges to prevent stress concentrations and ensure proper fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to jagged edges and material deformation. | Employ sharp, high-quality cutting tools specifically designed for aluminum to achieve clean, precise cuts. |
| Neglecting to deburr edges, creating potential failure points under stress. | Thoroughly deburr all cut edges after each cut to remove sharp corners and promote even stress distribution. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, Pressure Vessel Components, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||