This 0.975" thick Aluminum 6061 stock sheet, measuring 18"x14", is engineered for critical hydraulic systems. Its excellent strength-to-weight ratio and corrosion resistance ensure reliable performance under pressure.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.975" |
| Length | 18" |
| Width | 14" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet meets stringent industry standards for hydraulic component fabrication. The 0.975-inch thickness provides substantial structural integrity, while the 18-inch length and 14-inch width offer versatile material for custom manifold blocks, mounting plates, and structural supports within hydraulic systems. Aluminum 6061 is renowned for its moderate to high strength, excellent corrosion resistance, good machinability, and weldability, making it a preferred choice for applications where weight reduction is also a factor. Its mechanical properties are well-suited to withstand the operational stresses and fluid pressures inherent in hydraulic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against design specifications. 2. Precisely machine to required component geometry using appropriate cutting tools and speeds for Aluminum 6061. 3. Deburr all edges and clean thoroughly to remove machining debris and oils prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting parameters leading to tool wear or poor surface finish. | Consult machinability data for Aluminum 6061 and use sharp, appropriate tooling. Maintain consistent feed rates and speeds. |
| Insufficient cleaning of the sheet prior to welding or sealing, leading to contamination. | Thoroughly degrease and clean all surfaces with a suitable solvent and wire brush before any welding or sealing operations. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic manifold blocks, Mounting plates for hydraulic pumps and valves, Structural supports in hydraulic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||