This 0.986" thick Aluminum 6061 stock sheet, measuring 23" x 19", is engineered for superior performance in demanding heating and cooling systems. Its excellent thermal properties and durability make it an ideal choice for critical components.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.986" |
| Length | 23" |
| Width | 19" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers exceptional thermal conductivity, crucial for efficient heat transfer in HVAC and industrial cooling applications. With a nominal thickness of 0.986 inches, a length of 23 inches, and a width of 19 inches, it meets stringent dimensional tolerances for precise fabrication. 6061 aluminum's alloy composition provides excellent corrosion resistance, ensuring longevity in diverse operational environments. Its inherent strength-to-weight ratio facilitates structural integrity without excessive mass.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately cut to the required dimensions using appropriate tooling. 3. Fabricate and integrate into the heating/cooling system following design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for thermal load. | Verify thermal calculations and select material thickness to meet peak load requirements. |
| Inadequate surface preparation before joining. | Thoroughly degrease and mechanically clean surfaces to ensure optimal weld or bond integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat exchanger fabrication, Industrial chiller components, HVAC ducting and manifold systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||