This Aluminum 6061 stock sheet provides exceptional strength and corrosion resistance for critical pressure and temperature control systems. Its precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.905" |
| Length | 41" |
| Width | 31" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a robust solution for pressure and temperature control applications. With a substantial 0.905" thickness, 41" length, and 31" width, it meets stringent dimensional requirements. Aluminum 6061 is a precipitation-hardened alloy known for its excellent weldability, good strength-to-weight ratio, and superior corrosion resistance, making it suitable for components exposed to fluctuating thermal conditions and moderate pressures. Its inherent properties facilitate precise machining and fabrication for custom solutions in valve bodies, heat exchangers, and pressure vessel components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended operating environment and fluid. 2. Ensure all cutting, bending, and joining processes are performed according to industry best practices for Aluminum 6061. 3. Conduct thorough inspection and pressure testing before operational deployment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade aluminum for high-pressure or high-temperature applications. | Always select Aluminum 6061 or a comparable high-strength alloy for critical pressure and temperature control systems to ensure structural integrity and safety. |
| Improper heat treatment or post-fabrication stress relief. | Adhere to recommended fabrication procedures for Aluminum 6061 to prevent premature failure due to residual stresses. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Valve body construction, Piping and manifold systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||