This Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it a prime choice for robust hydraulic system components and fabrication.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.894" |
| Length | 30" |
| Width | 38" |
Manufactured under strict quality controls, this Aluminum 6061 sheet boasts a thickness of 0.894 inches, a length of 30 inches, and a width of 38 inches. Aluminum 6061 is a precipitation-hardened alloy renowned for its moderate to high strength, excellent toughness, and outstanding corrosion resistance. Its weldability and formability are also noteworthy, allowing for intricate component fabrication within hydraulic systems, such as manifold blocks, structural supports, and pressure vessels where reliability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper surface preparation and deburring of cut edges. 2. Verify dimensional accuracy against design specifications. 3. Implement appropriate fabrication techniques, considering the alloy's properties for welding or machining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys for high-pressure hydraulic components. | Always select alloys specifically rated for the required pressure and operational environment, such as Aluminum 6061 for its strength and corrosion resistance. |
| Inadequate heat treatment after welding, compromising structural integrity. | Follow recommended post-weld heat treatment procedures for Aluminum 6061 to restore mechanical properties and prevent stress corrosion cracking. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Structural Components for Hydraulic Equipment, Custom Hydraulic Enclosures and Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||