This high-strength Aluminum 6061 stock sheet, measuring 0.869" thick, 43" long, and 48" wide, is engineered for demanding pressure and temperature control systems, offering exceptional performance and reliability.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.869" |
| Length | 43" |
| Width | 48" |
Manufactured under strict quality controls, this Aluminum 6061 alloy stock sheet exhibits excellent machinability and weldability, crucial for intricate pressure and temperature control components. Its precise dimensions of 0.869" thickness, 43" length, and 48" width ensure consistent fit and function. With a minimum tensile strength of 45,000 psi and yield strength of 40,000 psi, it reliably withstands significant pressure fluctuations and thermal cycling, making it suitable for heat exchangers, pressure vessels, and temperature regulation housings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris before assembly. 2. Apply appropriate sealant or gasket material as per system design specifications. 3. Securely fasten the sheet using recommended fasteners and torque values, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to leaks. | Thoroughly clean all mating surfaces and remove any contaminants, oils, or residues prior to installation. |
| Uneven fastener tightening causing stress concentration. | Utilize a star or cross pattern when tightening fasteners to ensure even pressure distribution across the entire surface. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel construction, Heat exchanger fabrication, Temperature control system housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||