This 0.831" thick Aluminum 6061 sheet offers superior strength and corrosion resistance, making it a reliable choice for demanding pulling and lifting applications. Its excellent machinability ensures custom fabrication.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.831" |
| Length | 13" |
| Width | 37" |
A proven choice for industrial professionals, this Aluminum 6061 stock sheet, with dimensions of 0.831 inches thickness, 13 inches length, and 37 inches width, exemplifies the standard for high-performance materials in pulling and lifting applications. Aluminum 6061 is a precipitation-hardened alloy known for its excellent corrosion resistance, good weldability, and high strength-to-weight ratio. These properties make it exceptionally suitable for fabricated components that require both structural integrity and minimal added mass, ensuring efficient operation and prolonged service life in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surfaces thoroughly to remove any debris or contaminants. 2. Position the Aluminum 6061 sheet according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fasteners, adhering to torque specifications to prevent overstressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for aluminum, leading to galvanic corrosion. | Utilize anodized or stainless steel fasteners specifically designed for use with aluminum alloys. |
| Over-tightening fasteners, causing deformation or cracking of the aluminum sheet. | Employ a torque wrench and adhere to recommended torque values for aluminum fasteners to ensure secure attachment without damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixture fabrication, Reinforcement plates for pulling mechanisms, Support structures for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||