This Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Its precise dimensions make it a reliable component for critical hydraulic system fabrication and repair.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.793" |
| Length | 13" |
| Width | 23" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet measures 0.793 inches thick, 13 inches in length, and 23 inches in width. Aluminum alloy 6061 is renowned for its excellent mechanical properties, including high tensile strength, good ductility, and superb corrosion resistance, particularly in marine environments. This makes it an optimal choice for components within hydraulic systems where fluid containment, pressure resistance, and longevity are paramount. Its machinability allows for intricate component design and precise fitting within complex hydraulic manifolds and structural elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove debris and contaminants. 2. Accurately machine or form the sheet to the required hydraulic component specifications. 3. Ensure all connections and fasteners are properly torqued according to hydraulic system design parameters.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to seal failure. | Implement a rigorous cleaning protocol for all surfaces that will come into contact with hydraulic fluids or seals. |
| Over-machining or material fatigue due to improper cutting speeds. | Adhere to recommended machining parameters for Aluminum 6061 to prevent material degradation and ensure dimensional integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Cylinder Components, Hydraulic System Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||