This 0.761-inch thick Aluminum 6061 sheet is engineered for critical pressure and temperature control systems. Its superior strength, machinability, and corrosion resistance make it an ideal choice for demanding industrial environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.761" |
| Length | 19" |
| Width | 24" |
A high-performance industrial component, this Aluminum 6061 stock sheet offers a thickness of 0.761 inches, a length of 19 inches, and a width of 24 inches. Aluminum 6061 is a precipitation-hardened alloy renowned for its excellent strength-to-weight ratio, good corrosion resistance, and superior weldability. These properties make it exceptionally well-suited for applications involving moderate to high pressures and varying temperature ranges, where structural integrity and thermal conductivity are paramount. Its balanced composition ensures reliable performance in hydraulic systems, heat exchangers, and pressure vessel components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Apply appropriate sealant or gasket material if required by system design. 3. Securely fasten the component using validated fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean all mating surfaces before assembly to ensure a proper seal. |
| Over-tightening fasteners, causing deformation of the sheet. | Adhere strictly to recommended torque specifications for all fasteners to prevent material stress. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Hydraulic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||