This 0.738" thick Aluminum 6061 stock sheet, measuring 23" x 19", is engineered for demanding pressure and temperature control systems, providing robust performance and reliability.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.738" |
| Length | 23" |
| Width | 19" |
A high-performance industrial component, this Aluminum 6061 stock sheet boasts a nominal thickness of 0.738 inches, a length of 23 inches, and a width of 19 inches. Fabricated from Aluminum alloy 6061, it delivers exceptional strength-to-weight ratio, good corrosion resistance, and excellent weldability, making it ideal for heat exchangers, thermal management systems, and pressure vessel components where precise temperature regulation and structural integrity are paramount. Its machinability allows for intricate designs and tight tolerances required in critical control applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for aluminum. 3. Securely fasten the sheet using compatible fasteners or through welding processes, adhering to industry best practices for Aluminum 6061.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to burrs or deformation. | Employ sharp, dedicated aluminum cutting tools such as carbide-tipped blades or end mills, and ensure proper feed rates and speeds. |
| Inadequate surface preparation before assembly or welding. | Thoroughly clean all surfaces with an appropriate degreaser and wire brush to remove oxides and contaminants, ensuring optimal joint integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Plates, Pressure Vessel Components, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||