High-performance Aluminum 6061 stock sheet, specifically engineered for critical pressure and temperature control systems. Its robust alloy composition ensures reliability and longevity in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.708" |
| Length | 15" |
| Width | 35" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet measures 0.708 inches thick, 15 inches in length, and 35 inches in width. The 6061 alloy is a precipitation-hardened aluminum-magnesium-silicon alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and ease of fabrication. These characteristics make it exceptionally suitable for components within pressure vessels, heat exchangers, and fluid handling systems where consistent performance under varying thermal and pressure loads is paramount. Its machinability allows for complex component creation for precise control mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris before installation. 2. Accurately cut the sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the sheet using compatible fasteners, adhering to specified torque values for pressure containment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper material selection for high-pressure applications. | Verify the 6061 alloy's suitability for the specific pressure and temperature requirements of the application. |
| Inadequate surface preparation leading to sealing issues. | Thoroughly clean and degrease all mating surfaces to ensure a reliable seal in pressure control systems. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure Vessel Components, Heat Exchanger Fabrication, Fluid Manifold Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||